Multi-Purpose Cleaner & Degreaser

• Available in Pre-Mix or Concentrate
• Made With Biodegradable Materials
• Won't Etch Aluminum
• Non-Corrosive, pH Balanced

Slick Products Multi-Purpose Cleaner & Degreaser is a non-corrosive cleaner designed to quickly remove oil, grease, and grime without corroding or etching aluminum or other metal surfaces.

  • Step 1

    Before application, scrape off areas with extra thick mud or pre-rinse with water. Dilute the concentrated Off-Road Wash to the proper ratio shown above or on the back of the bottle. Using a garden sprayer or foam gun, fully saturate dirty and muddy surfaces. Allow the wash to soak for 3-5 minutes without drying up. Keep the surface moist by misting with water. For best results agitate with soft bristle brush.

  • Step 2

    While the Off-road Wash is soaking, use the Multi-Purpose Cleaner & Degreaser to target greasy spots and areas with nasty grime or film residue. Apply a few squirts or as needed and agitate with a soft bristle brush. After 3-5 minutes has passed from initial application of Off-Road Wash, rinse the entire vehicle with a pressurized water source. (For best results use a pressurized nozzle on garden hose or pressure washer.)

  • Step 3

    After rinsing, use a microfiber towel to wipe down and dry all the surfaces. Apply the Multi-Surface Shine & Protectant to plastic, rubber, and vinyl surfaces. Hold can approximately 6-8 inches away, spray an even layer to coat the surfaces. Allow the product to sit for a few minutes before buffing, or leave for a wet look. (Do not apply to tire treads, seat, or areas that should not become slippery.)

Customer Reviews

Based on 21 reviews Write a review

Related Items